Looking to elevate your apparel game with bold, vibrant designs that last?Our DTF (Direct-to-Film) Transfers are your ticket to unleashing creativity without limits.
Why Choose Our DTF Transfers?
Vibrant, Full-Color Prints:Experience eye-popping colours that make your designs stand out.
Durable and Long-Lasting:Our transfers are built to withstand countless washes without fading or cracking.
Easy and Fast Application:Our hot peel transfers are quick and easy to apply, requiring no weeding or pretreatment. Simply position, press and peel to achieve professional-quality results.
Compatible With Your Favourite Garments: Suitable for materials like cotton polyester, blends, nylon, denim, even leather!
Friendly For All Humans: Press with total confidence.Our inks areOEKO-TEX® certified, ensuring that they are free from any chemicals that could be harmful to human health.
No Minimum Orders:Whether you're customizing a single tee or outfitting an entire crew, we've got you covered.
Applying your transfers is easy — just follow these steps and dial in your settings. No guesswork, no wasted blanks.
🔥 Step-by-Step Application
1. Pre-press your garment for 3–5 seconds to remove moisture.
2. Position your transfer where you want it on the garment.
3. Press with the recommended time, temp, and pressure (see below).
4. Peel the carrier film while it’s hot (our transfers are fast).
5. Cover with your cover sheet of choice.
6. Press again for 5 seconds to lock it in.
7. Wait 24 hours before washing or stretching. Seriously — let it cure.
💪 Cotton, Blends & Most Materials
Temp: 290ºF
Time: 10–12 seconds
Pressure: Medium to High
🏃♂️ Polyester & Sensitive Materials
Temp: 275ºF
Time: 10–12 seconds
Pressure: Medium to High
Pro Tip: Every heat press is a little different — if you're not sure, test on a spare garment first. Better safe than sorry.
🛠️ DTF Application FAQ & Troubleshooting
❓ My transfer isn’t sticking — what’s going on?
Double-check your temperature, pressure, and time. If your press isn’t hot enough or you’re using too little pressure, the adhesive won’t bond properly. Use a heat gun or temp strip to verify your press temp.
❓ The edges are lifting after pressing.
Give it a second press with a parchment or kraft cover sheet for 5 seconds. This helps seal the edges and lock in the adhesive.
❓ The film doesn’t peel cleanly.
Make sure you're using firm, even pressure. If parts lift with the film, let it cool slightly and try a cold peel — or add a bit more pressure on the next press.
❓ Can I use a home iron or Cricut EasyPress?
Technically yes, but not recommended. These tools don’t give consistent temperature or pressure across the surface. For clean, pro results, a real heat press is a must.
❓ When can I wash the garment?
Wait 24 hours before washing or stretching the fabric. This gives the adhesive time to fully cure and gives your print staying power.
