Introducing The Heritage Collection from LoneStar Adhesive.
Reminiscent of "Latigo" or "Pull Up" leather that displays creases where stress is applied to the material, this leatherette has a rich coloration that will bring the perfect high end touch to your next project. Create designs that will bring a touch of tradition to the durability your customers deserve.
Our LoneStar exclusive PREMIUM leatherette® is not only backed by an American Made adhesive, it's thicker and more reliable than typical leatherette found on the market today.Through extensive testing and manufacturing improvements, we have constructed a laser-friendly leatherette you can trulytrust!
These faux leather panels come in an array of colors to match any request your customer throws at you. Shipped ready to use these panels are backed by the industry leading thermal activated adhesive, Durra-Bull.
PREMIUM leatherette® is approximately .059" / 1.5mm thick. Panel dimensions are 12in x 24in
This adhesive is made to last — just follow the steps below to get a clean, permanent bond.
🔥 Step-by-Step Application
1. Pre-press the garment for 3–5 seconds to remove moisture and smooth the surface.
2. Position the patch exactly where you want it and secure with some heat tape. Once it's on, it’s not moving.
3. Cover and press for the recommended temperature, time and pressure.
4. Let it cool for at least 15 minutes before touching, flexing, or packaging. This allows the adhesive to fully cure.
Recommended Settings
Top Only Heat Presses
Temp: 300ºF
Time: 45 seconds
Pressure: Medium
Dual Heat Presses
Top Temp: 280ºF
Bottom Temp: 280ºF
Time: 30 seconds
Pressure: Medium
Caution: Every heat press and desired cover sheet is a little different — if you're not sure, test on a spare garment first and adjust time and temperature for a proper bond. Better safe than sorry.
💡 Pro Tips
Machine washing is not recommended — hand wash only for best results.
Great for hats, bags, and apparel — but always test first with heat-sensitive materials.
🖋️ Engraving Instructions
For best results, engrave with as little air as possible, while turning it back on for the cutting phase. Clean remaining char with LA Awesome or similar degreaser.
